[vc_row padding_top=”0″ padding_bottom=”0″][vc_column][vc_single_image image=”1085″ img_size=”1000×600″ alignment=”center”][vc_column_text]
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]
Acid Etching & Water Base Dyes Overlays
In general, thin overlays less then ¼ inch in thickness cure out and can be stained in 24 hours. While they may not be 100% cured, they are dry enough to accept a stain without moisture effects. Once the 24-hour cure is complete, stain should be applied within a 72-hour window. If you wait longer than 72 hours, the overlay may become so hard that the stain cannot penetrate and react properly.[/vc_column_text][vc_column_text]
Decorative Saw Cutting
Peak Concrete LTD. is one of the only concrete contracting companies to use the exclusive AccuGlide saw – a concrete saw that runs on rails to ensure a straight cut every time.[/vc_column_text][vc_accordion][vc_accordion_tab title=”Addition Construction Steps”][vc_column_text]We will work with all project team members to define the logistical requirements for the construction process, such as areas for deliveries, placement of barricades (if required) and hours of operation.[/vc_column_text][/vc_accordion_tab][vc_accordion_tab title=”Contact”][vc_column_text]Email: info@peakconcrete.ca
Office: 604 – 241 – 1465
8:00 am – 4:00 pm M-F[/vc_column_text][/vc_accordion_tab][/vc_accordion][/vc_column][vc_column width=”1/2″][vc_column_text]
Sealing – Acrylic, Urethane, Epoxy
This service provides excellent protection against outdoor exposure conditions. Most products are also breathable, allowing moisture vapor to escape.[/vc_column_text][vc_column_text]
Architectural Finishing
An architectural finish is a standard finish characterized by a uniformly good appearance. This finish is most often specified for “exposed” surfaces.[/vc_column_text][/vc_column][/vc_row]